01353 883811

Backlit Polyester

Our Backlit Polyester is fire rated and is made from a 165gsm textile for great light transmission.

Backlit Polyester is suitable for backlit lightboxes, exhibition graphics and silicone edge graphics.

Our Backlit material has excellent light transmission due to the 165gsm flame retardant textile we use which is printed using a dye-sublimation process which uses special inks and undergoes a post-print heating process to fix the ink into the fabric. This makes it both scuff-resistant and washable with a brilliant and vibrant colour payoff.

We finish our Backlit signs with various finishes from stitched hems and eyelets, velcro and pole pockets.

The maximum finished graphic width we can produce is 3000mm (depending on chosen finish) with a roll width of 3200mm.

Artwork

For any Backlit Polyester items, 50mm bleed must be supplied. This allows for any extra material required for hems, as well as shrinkage and movement when printing and cutting.

Please Note

Backlit Polyester items are supplied on a roll. Please be aware that Backlit Polyester graphics can crease and bruise if handled without care.

Our thread colours are black or white. Our production team will choose the most appropraite colour to complement your graphic.

Currently we can only print up to 3.2 metres (10ft 6in) on the shortest edge, to our standard pricing. Items above this size will require a bespoke quotation.

Backlit Polyester
Backlit Polyester

Finishes for Backlit Polyester

  • Stitched Hems & Eyelets

    Graphics will be given a stitched hem, then eyeletted at equal distributions along the hem. Eyelets are clear plastic.

    The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that is no problem at all - simply let us know what you need when you place your order.

    There is no charge for this finish.

  • Stitched Hems Only

    Graphics will be given a stitched hem.

    There is no charge for this finish.

  • Stitched Hems with Velcro

    Graphics will be stitched to a strip of either hook or loop edging. Please specify which is required when ordering.

    A variety of widths are available - please contact us to discuss your requirements.

    Black or white strips are available. Our sewists will choose the most appropraite colour to complement your graphic, unless specifically requested.

    There is an additional charge for this finish.

  • Pole Pocket(s)

    A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.

    The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.